Article Sidebar

PDF
Issue: Vol. 520 No. 1B (2022)
Section: Các bài báo
DOI: 10.51298/vmj.v520i1B.3921
Date Published: 10/02/2023
Views 416
Downloads 340
How to Cite
Khiếu, T. T., Chu , T. Q. H., Nguyễn, P. H., & Nguyễn, T. H. (2023). AESTHETIC RESULTS AND PATIENT SATISFACTION USING 3D PRINTED RESIN TEMPORARY CROWN. Vietnam Medical Journal, 520(1B). https://doi.org/10.51298/vmj.v520i1B.3921

AESTHETIC RESULTS AND PATIENT SATISFACTION USING 3D PRINTED RESIN TEMPORARY CROWN

Thanh Tùng Khiếu1, , Thị Quỳnh Hương Chu 2, Phú Hoà Nguyễn1, Thu Hương Nguyễn1
1 Hanoi Medical University
2 Hanoi Central Odonto-Stomatology Hospital

Main Article Content

Abstract

Objectives: Aesthetic results and patient satisfaction using 3D printed bio-resin temporary restorations in the anterior teeth. Material and methods: Descriptive study in 32 anterior teeth was placed printed bio-resin temporary crowns at the School of Odonto-Stomatology - Hanoi Medical University in 2021 - 2022. Teeth were prepared, scanned, designed and 3D printed using DIO Navi C&B resin. The temporary crown was cemented and evaluated the aesthetic results and the patient's satisfaction at the time immediately after cementation and 7 days after cementation. Results: 32 anterior teeth using 3D printed resin temporary crown achieved very good results in terms of shape, immediately after cementation (87.50%) and at 7 days after cementation (81.25%). The temporary crown color achieved good and very good results over 90% at both times after cementation and 7 days after cementation. Surface gloss achieved good results at 87.5% at the time after cementation and good results at 62.5% at 7 days after cementation. 100% of patients are satisfied and very satisfied with the treatment results. Conclusion: 3D printed resin temporary crown ensure the aesthetic factor and satisfy the patient about the treatment results while waiting for the permanent crowns.

Keywords

Temporary crown, temporary restoration, 3D printing, CAD/CAM.

Article Details

References

1. Burns DR, Beck DA, Nelson SK, Committee on Research in Fixed Prosthodontics of the Academy of Fixed P. A review of selected dental literature on contemporary provisional fixed prosthodontic treatment: report of the Committee on Research in Fixed Prosthodontics of the Academy of Fixed Prosthodontics. J Prosthet Dent. 2003;90(5):474-497.
2. Lodding DW. Long-term esthetic provisional restorations in dentistry. Curr Opin Cosmet Dent. 1997;4:16-21.
3. Balkenhol M, Knapp M, Ferger P, Heun U, Wostmann B. Correlation between polymerization shrinkage and marginal fit of temporary crowns. Dent Mater. 2008; 24(11):1575-1584.
4. Lee WS, Lee DH, Lee KB. Evaluation of internal fit of interim crown fabricated with CAD/CAM milling and 3D printing system. J Adv Prosthodont. 2017;9(4):265-270.
5. Hickel R PA, Tyas M, et al. FDI World Dental Federation - clinical criteria for the evaluation of direct and indirect restorations. Update and clinical examples. J Adhes Dent 2010;12(4):259-272.
6. Al-Halabi MN, Bshara N, Nassar JA, Comisi JC, Rizk CK. Clinical Performance of Two Types of Primary Molar Indirect Crowns Fabricated by 3D Printer and CAD/CAM for Rehabilitation of Large Carious Primary Molars. Eur J Dent. 2021.
7. Hà Huy Hoàng, “Kết quả phục hình tạm ở bệnh nhân mất răng nhóm răng trước bằng composite gia cố sợi.” Luận văn bác sỹ Nội trú, Trường Đại học Y Hà Nội. 2019
8. Sulaya K, Guttal SS. Clinical evaluation of performance of single unit polyetheretherketone crown restoration-a pilot study. J Indian Prosthodont Soc. 2020;20(1):38-44.